If you’re experiencing issues with the cigarette lighter or power outlet in your RAM 1500, it’s often related to a blown fuse. Knowing the right fuse size and where to locate it can save you time and effort when troubleshooting the problem. In this article, we’ll explore the cigarette lighter fuse in the RAM 1500, its size, and how to identify and replace it.
What Is the RAM 1500 Cigarette Lighter Fuse?
Hidden Automotive DiscountsThe fuse responsible for your RAM 1500’s cigarette lighter (or 12V power outlet) is typically a 20-amp fuse. This fuse is designed to protect the electrical circuit that powers the lighter and other connected accessories, such as phone chargers and GPS devices. If there is a power surge or if an item is plugged in that draws too much current, the fuse will blow to prevent further damage to the electrical system.
Where Is the Cigarette Lighter Fuse Located?
The fuse for the cigarette lighter is located in the fuse box, which can typically be found either under the dashboard near the driver’s side or in the engine bay. The exact location and fuse number may vary depending on your RAM 1500’s model year and configuration.
In many RAM 1500 models, the cigarette lighter fuse is often labeled as F93 and is located in the interior fuse box. However, it’s always best to check your vehicle’s owner’s manual for the most accurate information, as fuse numbers can change depending on the year.
How to Identify the Correct Fuse?
- Check the Owner’s Manual: The manual will provide a detailed chart showing the fuse numbers and what each one powers. Look for the section that lists the power outlets, which might include the cigarette lighter, and verify the fuse number and location.
- Inspect the Fuse Box Cover: On the inside of the fuse box cover, there should be a diagram that shows the layout of all the fuses and their functions. Find the one labeled for the cigarette lighter or power outlets.
- Use the Right Fuse Size: The standard fuse size for the RAM 1500 cigarette lighter is 20 amps. It is crucial to replace the blown fuse with one that matches the correct amperage to avoid further electrical issues.
How to Replace the Cigarette Lighter Fuse?
- Turn Off the Vehicle: Before you start working on the electrical system, make sure your RAM 1500 is turned off and the key is removed from the ignition.
- Locate the Fuse Box: Depending on your vehicle’s model, you may need to remove a cover to access the fuse box. Refer to your owner’s manual for the exact location and instructions for accessing the fuse box.
- Find the Correct Fuse: Using the diagram on the fuse box or in your owner’s manual, locate the fuse responsible for the cigarette lighter. Remove it carefully using a fuse puller or a pair of tweezers.
- Check the Fuse: Visually inspect the fuse. If the metal strip inside the fuse is broken, then the fuse is blown and needs to be replaced.
- Replace with a New Fuse: Replace the blown fuse with a new 20-amp fuse. Make sure it’s properly seated in the slot to ensure a secure connection.
- Test the Lighter: After replacing the fuse, test the cigarette lighter to ensure it is working properly.
When to Seek Professional Help?
If the new fuse blows shortly after installation or if the cigarette lighter still isn’t working, there may be an underlying electrical issue, such as a short circuit. In this case, it’s a good idea to consult a professional mechanic or an automotive electrician to diagnose and fix the problem.
Conclusion
The RAM 1500’s cigarette lighter fuse is typically a 20-amp fuse located in the interior fuse box. Replacing a blown fuse is a simple task that can be done by following the steps outlined above. However, always ensure you’re using the correct fuse size to avoid damaging the electrical system. If issues persist after replacing the fuse, professional help may be needed to further investigate any underlying electrical problems.
Connect with us
